【Characteristics】 （1） HF-WXP is composed of power supply, receiving antenna, A/D converter, two indicating lights, and a bright 5-digit LED code tube of 5 inches in height. The operator can easily read out the measured temperature on the display screen board. （2） Within a distance of 100m, HF-WXP can receive the thermometer code number and temperature measured by HF-05WX. The data transmitted is reliable, stable and clear. （3） HF-WXP is capable of receiving the measured temperatures, which are transmitted from 10 different thermometers at different time. The 1digit of green code tube which will indicate the thermometer code transmitted, and the following red 4-digit will display the temperature measured by the above mentioned thermometer code. （4） The top of HF-WXP has the installation of green and red indicators. When the green indicator turns on, it is ready to receive signals from various thermometers. However, when the red indicator turns on, HF-WXP is too busy to receive. Under such condition, mistakes by operators can be fully prevented. After receiving transmitted signals, the green indicator will turn off and the red indicator will turn on. The red light will stay on for 30 seconds. After 30 seconds, the green indicator will turn on again. It means that the HF-WXP is ready to receive the temperature to be measured. 【Specification】 Model: HF-WXP     Transmission: 434.33 MHz     Receive Distance: ≤100 meters   Display Temperature: 0℃-1800℃   Voltage: AC 200V-220V、50Hz-60Hz   Display Screen: 5 digit 5-inch high-light LED